Hello and welcome.
Now that we have our raspier by connected to our network, let's see our.
To look for our hospital by IP, now you need to log into a router and I have to to you need to enter
your username and password for the Lauter, then go to the wireless networks.
And from here, you can check the wireless statistics to see which of these we have.
Currently we have six.
Network or sex devices connected to our network and as you can see, we have their Mac address now.
Now we know that the IP address for our Raspberry Pi is one hundred ninety two hundred sixty eight zero
to 103.
And to make sure that this IP address is still working, we should go to the ACMD or Windows, PowerShares
and Bing our.
Prosper by IP swordfight ping 190, 268 to under three.
Now, as you can see, we are pinging this IP address and it's replying and since we are receiving a
reply, it means that our last piece of pie is connected.
Now we need a software to communicate with our raspier party and the software that we are going to use
is Partick.
And it's a free open source software, which is a free search now click on the first result and download
it from here.
We need I have 64 bit operating system, so I will choose this version.
Downloaded, it's about three megabyte file.
Look, next, next, histone.
Now, it shouldn't take long.
OK, now finish.
Go to start menu, right, click and open the software, which is Potti.
Rana's administrator click Yes, now here you need to interview Raspier by IP address.
And here, the default port is 22, if you have 24 light on my last paper, you can check this.
And here, right, are people to save this Prasit now click open.
Now, I will show you a method in which you can add a username to your connection.
So let's go back up in poverty and here, select RPI.
Claude.
Now click hi.
SRN.
Hi, Art, and your IP address and said the difficult part to 22.
Let's save it up in.
Now, if you kept receiving this error, what you need to do is connect your Raspberry Pi and enable
a search and it's usually disable by default.
So you enable this.
We need to connect our Raspberry Pi again to our display.
Now, as you can see, we are putting a Raspberry Pi in order to change the settings for this research.
And this is an easy thing
to do, is to open the show and write your commands.
Now, as you can see, we have our SPELLBIND connected to the Internet and it's the very same IP address.
I'm going to the command by clicking here and in this window.
What you need to do is the following.
You need to write Soldo
USPI.
Then small dash confidence then hit, as you can see, we have a list of options here and you need to
go to the interface options and here go to a search and select, enable or disable.
Would you like the search server to be able to choose?
Yes.
Then enter.
And now, if I went back to our device, which is our Windows device, now, once you are done with
these settings, what you need to do next is go to the start menu, open up QWERTY.
And Lord, these settings change the path to twenty two, which is the full court, make sure that you
have the right IP address and the right username select as a search and click option.
Now let's save this click open.
And as you can see, it's connected and it needs the password, so like I hit enter.
And now you can send commands to your PI and you can see a list of the folders inside your PI, as you
can see desktop downloads, documents, music and everything else.
Now, this is how to connect to your Raspberry Pi from your Windows operating system using a search
in the next hour.
So we are going to discuss how to interface it with LabView now that we have it connected and we know
the IP address of our Raspberry Pi.
Thanks for watching this lesson.
See you next.