All right.
So let's go ahead and go through with this setup.
So here we are.
You know, it's A, B and C and now we're ready to install.
So we're going to click next install now.
Now, this is Windows 11.
So there are a few caveats and I'm going to walk you through them.
Don't worry.
If you just try to next next finish your way through this installer, it will fail.
That's because Windows 11 is looking for a trusted platform module which is not emulated and even G.
And there are a few other things that are required in order to get this to work.
Let's move this to the side over here.
All right.
So the product key, if you have a valid product key, by all means, put it in.
If not, you can use Windows in sort of an evaluation mode.
Right.
So I'm going to click I don't have a product key.
And we're going to pick windows 11 pro because other options.
But I'm just going for pro.
Mainly because this is the version that will allow us to join the domain.
This is the part I want to show you.
This PC can't run on Windows 11.
Your PC doesn't meet the minimum system requirements.
Right?
So you might say, well, of course it does.
What do I do?
This trips most people up now.
It doesn't meet the requirements, but there are a few things we need to change and it's kind of a secret
hotkey combination to get here.
What you want to do is you want to press shift f ten.
Now if you have a laptop with an F in key, that is a key that shares a F function with some other function.
You're going to want to press shift F in F10.
There you go.
You've got the command prompt.
All right, so in here, we're going to run it and we're going down to the computer h key local machine.
System.
Set up.
And we need to make a new key here.
So I'm going to right click set up.
What is a new key?
I'm going to name it lab config, just like that.
Notice the camel case then with a lab config selected with a right click new 32 bit d word.
I'm going to name it exactly like this bypass TPM check.
I'm going to press enter and change the value from 0 to 1.
Enter.
That will bypass the check for the trusted platform module.
Okay.
Now there's a few others.
We need to add.
New three to the D-word.
Bypass ram check.
That way we can bypass the RAM requirement check.
Although we meet those requirements here.
Which this is something nice just to have in place so that you can get everything to work.
Then finally, new 32 bit D-word bypass.
Secure boot check.
Press enter again one.
Now everything is set to one.
Bypass TPMs.
Check.
Bypass ram.
Check.
Bypass.
Secure boot check.
All set to one.
Okay.
You see that hexadecimal base?
All right, so now we can close this out, exit the command prompt.
We go back.
And then we click next again and watch the magic happen.
That was not the magic I was talking about.
It doesn't happen.
I mean, you probably type of something.
All right.
So the reason it's doing this.
Is because we don't have everything set up.
Right?
Right.
So if I click stop, I think I'm missing a CPU.
Edit.
Yeah.
I think we need to settle this two cpu's.
Save.
Right click start.
Let's try it now.
Yeah.
One gigahertz or faster with two or more cores.
So we only had one core.
We just set it to two.
So now this should work.
So you guys, everything needs to be exact when you're setting up these labs.
One mistake can cause things to break.
But don't worry.
We're going to work our way through it.
All right, we're back here.
Quick.
Next install.
Come on, guys.
We can do it this time.
I know it.
And I like to do things multiple times.
Right.
I want you to see repetition.
I want you to see how I do this.
The more you see it, the easier it will be for you.
When you do this on your own.
You know, it's one thing to watch these videos.
It's another to type the commands along with me.
And the more you watch this, the easier and more intuitive it will be for you.
All right.
So we'll say I don't have a product key.
When it's 11 pro next.
All right.
Effen shift f10 red yet it.
Each Hkeylocalmachine system.
Setup.
Right click.
New Key Lab Config.
Right click new.
32 the D-word bypass TPM Check one.
Bypass.
Ram.
Check one.
Right.
And then no D-word.
32 bit bypass.
Secure boot.
Check.
Enter one.
Close.
Exit.
All right.
We're going to go back and then click next and they should do it.
Guys, you think we did it right?
I think we did.
Yeah.
And we did it was the issue was that the cause we didn't have that set up correctly.
So when you get to the screen upgrade or custom, you want custom and you're not going to see anything.
Right?
Where are the drives?
Oh, no.
What do we do?
Well, fortunately, you go back here.
Documentation tells us that this is an issue that's number nine, where it says import.
That's what you need to read these instructions.
But I'll spare you the reading and I'll just show you what you need to do.
I just wanted to give you the reference.
What we do here is we click Load Driver, we go to browse and we go to the B drive, a floppy B drive.
Yes, I know.
That is bizarre.
Don't ask me why this is the case.
Go to storage and then you go to Windows 2008.
You go to Windows RTG directory and then you click amd64.
When you do that, you'll see this redhat driver.
It's available and you just click next.
I know it's kind of bizarre, but this is what you need to do in order to get Windows 11 to work.
And that's really the only step.
That's the last kind of strange step.
With Click Next.
And we're off to the races, guys.
Now, when we try to set up Windows 11 is going to run into a little bit of an issue because Windows
11 likes to be connected to the Internet.
We're not connect to the Internet.
We don't have a router yet.
It arrived.
Okay, but that's okay.
We're just going to set it up as best we can without the Internet connection, and then we'll proceed
from there.
Right.
So, Max, actually, what we're going to do, though, before we get too deep, is I want to install
the custom icon set so that I can truly show you some of the fun we can have with the Google.
All right.
So I'll see you guys in the next lecture by.