- [Voiceover] In the previous video,
we looked at the protons on benzene.
And we said all six protons were in the same environment,
therefore all six protons were chemical equivalents,
and should give us only one signal on an NMR spectrum.
And so here's the one signal on a spectrum
due to the protons on benzene.
If we compare benzene to this compound,
this is tetramethylsilane or TMS.
And the protons on TMS are all in the same environment
and so therefore we would expect one signal for TMS.
And here's the signal for TMS right here.
In an earlier video we said that
as you go to the right on an NMR spectrum
you're talking about a lower frequency signal.
So a lower frequency signal as you move to the right
on an NMR spectrum.
And so if you move to the left on an NMR spectrum,
you're talking about a higher frequency signal.
And so therefore, the protons on benzene
have a higher frequency signal
than the protons on TMS.
TMS is actually our standard
because the protons on TMS are more shielded
than almost all organic compounds.
And so therefore it's our reference.
And so instead of talking about frequency,
we could talk about chemical shift values here.
And the chemical shift would be,
would be a similar idea to the frequency.
So as you go to the right,
you're talking about a lower chemical shift.
And as you move to the left on an NMR spectrum,
you're talking about a higher chemical shift.
So a higher shift as you move to the left.
So the protons on benzene have a higher chemical shift
than the protons on TMS.
Actually we set this equal to zero.
So this is our standard.
So how do we figure out what the chemical shift is?
For example for the protons on benzene,
it looks like the signal appears
a little bit past seven here.
So how do we get this number for a chemical shift?
Well again, everything is compared to TMS.
And so let's look at the formula
for calculating chemical shift.
And so if I move down here
we can see the formula for chemical shift.
Chemical shift is equal to
the observed shift from TMS in hertz,
times 10 to the sixth,
divided by the spectrometer frequency in hertz.
For example, let's say that we are using an NMR spectrometer
operating at 300 megahertz.
So we're using a 300 megahertz spectrometer here.
If you're using a 300 megahertz spectrometer,
the protons on benzene absorb a frequency
2181 hertz more
than the protons on TMS.
And so once again TMS is our standard, our reference.
So this difference,
if you're thinking about frequency,
this difference between our two signals,
is 2181 hertz,
if we are using a 300 megahertz spectrometer.
And so let's go ahead and figure out
the chemical shift for the protons on benzene.
So let's get some more room down here.
And so here's a symbol for chemical shift,
so chemical shift is equal to
the observed shift from TMS
that was 2181,
so that's 2181 hertz,
and we need to multiply that by 10 to the sixth,
and the reason we multiply that by 10 to the sixth
is because the spectrometer is in megahertz here.
So 300 megahertz is 300
times 10 to the sixth hertz.
And so we can cancel out,
we can cancel out the hertz,
we can cancel out 10 to the sixth,
and so we have a simple calculation here
to figure out the chemical shift.
And so let's go ahead and do that,
so we turn the calculator on,
2181 divided by 300
gives us 7.27.
So this is equal to 7.27.
Notice how the hertz will cancel out.
And we have right here ppm
or parts per million
because these signals are reported as
a fraction of the operating frequency of the spectrometer.
And so there's a reason why we do that.
So we got this number 7.27 here.
Let's do this calculation again,
let's say we did this,
we ran the spectrum on a different spectrometer.
Let's say we're using a 60 megahertz spectrometer.
So let's change it up a little bit.
So a 60 megahertz spectrometer,
if you use a 60 megahertz spectrometer,
the protons on benzene absorb a frequency
436 hertz more than the protons on TMS.
So to calculate the chemical shift now,
the difference would be 436 hertz,
times 10 to the sixth,
divided by,
now we're using a 60 megahertz spectrometer,
so 60 times 10 to the sixth hertz,
once again the hertz cancels,
the 10 to the sixth cancels,
and we can do that calculation.
So we take a 436,
we divide that by 60,
and we get 7.27 again.
So we get 7.27.
Notice we got the same value we did up here right?
So 7.27 is a constant,
no matter what kind of spectrometer you're using.
So you could be using a 300 megahertz spectrometer,
or a 60 megahertz spectrometer,
you're gonna get the same value for the chemical shift.
And so that's why we go through this calculation here.
So we get a constant value for the chemical shift.
So the protons on benzene
have a chemical shift of 7.27.
And we'll talk much more about chemical shifts
in the next few videos.