Hello again, and this lesson, I will teach you how to assign a fixed IP address for Rossborough by
Balde.
Why do we need this in both cases, B and C and such control, we get the IB using IAFF config command,
which means that we need to connect Rossborough by at least once every time we want to remote control
it.
Tonight's I.B. So.
A screen is needed every time so that we can know the IP and use it to solve this problem, we are going
to assign a fixed IP address to our spirit by board, by going to our Internet browser and look for
the Mac address of the board and assign it to a fixed IP address, which cannot be changed no matter
what.
You need to understand that this is very important so that you don't have to connect to a screen each
time you want to remote control it, you just talk it up to your router and write Tibey and your fiancee,
client or associate Shell.
And the connection is ready to go or is a good tool.
If you don't want to use the remote control, you don't need to watch this.
Listen, please go to the next section.
Let's do the steps first.
Go to your main router, use it in, uh, in the back of the router and could be out of this.
The amount of garbage has an address.
It's an IP address.
You look at the back of the router to see if threatened or not.
If it's not, you need to try write one of these three I.B. in your Internet browser.
The explanation will be on the table in Qatar, but it's the same process for all, you can do the same
for all with a slightly different way method.
You can just type that out or name and the word asare or the sentence a scientifics IP address and editorial
or documentation will appear for you.
After entering the marital bed, you will be asked to provide those on him and Buckwald, which are
usually admin admin head over to the HCB, sitting on the network section, go here to the network section
and go to the HCB.
Client list.
After going with the client list, all the connected devices will be shown here, as you can see, here
is our Raspberry Pi with its Mac address now that Mac address and head to the address, the salvation
section under the HCB section here.
Right.
The Mac address and the IP address that you want to sign, then click on Save its that symbol.
This IP will be the fixed IP address for this Mac address of Sperry by so and any time you need to accept
that as mirabai you just need to call it by this IP address.
No need to hook it up to the screen and see its IP address.
There is no dynamic or automatic IP address assigning process its IP address and it can be to be used
by doing this.
We assign 190 192, 168 one 10.
As I before our eyes, Mirabai, but now that this happened, but know that this has to be done again
if you change the network you are connected to.
So if you are in your home network, you are assigned a fixed IP address in your home router.
If you are at work, you need to access the router at work and assigned a fixed IP address.
Again, it's a painful process, I know, but it's necessary if you want to remote control your rasberry
by.
That's it.
Please, if you have any questions to ask us.
That's it for now.
This is Ashraf Alamodome, thanks for watching.
See your next lesson.