呃， uh uh,
接下来我要做的是 and as the next thing I want to be working on the
手枪停止， pistol stop,
它完全由塑料制成。 which is made entirely of plastic.
我将创建一个 I will create a
气缸 cylinder here
给予 give its
十八面 eighteen sides
使你在z轴上没有旋转， makes you it doesn't have a rotation on the z axis,
然后我把它定位好 and then I will position it so that it
适合于 fits the angle of
我们的 our
参考图像。 reference image.
现在我要确保它的居中 and now I'm just gonna make sure it's centered so
在x轴上把它设为0 put it to zero at the x axis
制作是 and make is
对我们的接收年稍微调整了一点 a bit more adjusted to our receiver year
小点 bits smaller
现在我要把它折叠成不可避免的多边形我将在上面涂上一种灰色的材料 and now I'm going to collapse it to inevitable poly and I will just apply a gray material on it
这样看起来更好。 so that it looks better.
现在我要讲的是 now I'm just going to
抓住这些面孔 grab these faces year
7个 seven of them
并且 and
拖拽 drag it
在这里的时候，在当地的护城河里 out here while being in the local moat
仍然存在于当地的模式中。 and still being in the local modes.
我给了它一个紧缩的年份 I'm giving it that squeeze year
类似于我们在股票上所做的 similar to what we were doing on the stock
如果你还记得 if you remember
在这里稍微挤压一下 to gain a bit of squeezing here
所以手指的前半部分是指 so that the front part of the grip where the fingers would be is actually a
多一点的曲线 bit more of a curve
在那里 there a
更陡的曲线。 steeper curve.
在后面也是一样。 same here in the back.
这样我们就可以在这里调整主形状了。 and that way we can just adjust the main shape here already.
我把这些拿出来 let me just take these
在洞察力的边缘 edges here in the insight
中间加上一个额外的边循环 and the centre and add an extra edge loop to it
这样我们就可以在没有对称修饰符的情况下工作了 so that we can then work without our symmetry modifier
删除右边栏 gonna delete the right side
然后我将继续 and I will then continue by
为这里的一切做一个循环， making an edge loop for everything here,
给它，我们设置x形式 give it and we set x form
现在我们可以用这个 so that now we can take that
这里的边循环 edge loop here and
当处于边缘时 while being in the edge constrains
水平对齐it年 horizontally align it year
接下来我要把这些边 and next I'll take these edges you
确保我们不在边缘受限模式中 make sure we are not in the edge constrained modes
并且 and
从地质学的角度看， grab some fresh geologically out here,
让我 and let me
把这些鸟拉到右边 pull these birds over here to the right sides
这些我们只能调整你左边的部分 and these we can only adjust the bits you to the left
只是多一些嫉妒的艺术 just grain some more jealously arts
同样的一年也是最重要的一年。 and the same was the year for the top part.
现在我要把这些鸟带到这里 and now I'm going to take these birds here
还有 and also
把他们推到右边， pushed them to the right side more,
我想在这里加上另一个边循环。 and I wanna add another edge loop here for these.
我将在参考图像上再看一看 and I'm gonna have another look here at the reference image
在那 at that
曲线部分 curvy part here
在底部。 at the bottom.
我就会 and I will just
继续 continue by
带着这些鸟 taking these birds
然后把它们推出一点。 and push them out a bit.
把它们都拿出来，在y轴上给它们一个挤压 take them all and give them a squeeze here on the y axes
不能把这些边推回去一点 cannot push these edges bit back a bit
在这些基础上，不平衡的地方我只是在对齐它们 and unbalanced great in these bases here I was just aligning them
所以它们实际上是 so that they are actually
都在同一个坐标下 all on the same coordinates
现在我要把这些 and now I'm just gonna take these
两个词 two words and
把它们连起来，去掉中间的这个词， connect them and get rid of this word that we have in the middle,
让我们在这里做一些我们不需要的边循环，我要把它们去掉。 and let's make selections here for these edge loops that we don't need I was gonna get rid of them.
最好还是留着它 it's better to keep it
在开始的时候我们还在研究我们的形状 locally in the beginning while we are still working on our shape here
扫描器 scanner
再推一点， push that up a bit,
现在我要把这些脸， and now I'm going to take these faces,
我想和他们斗争 and I want to battle them out
所以我要到这里来看看挤压的局部正常模式 so I will go over here to the local normal mode in the extrusion
把他们带来 and bring them
到 to
合适的尺寸 the right size so that it
与所有接收年保持一致 aligns with all receiver year
把这些边和边 gonna take these edges and
我要确保我删除了我们不需要的面 actually let me make sure I delete the faces that we don't need here
挤压产生了一些面孔 the extrusion just brought out some faces that
我们永远不会看到 we will never see
现在只需要一个小时 and now just an hour
到这里来看看对称性。 go over here to the symmetry.
回到那个循环边 go back to that edge loop
把它拉下来一点， and drag it down a bit,
看起来是这样的 and it seems like it's going
向上一点，在左边。 up a little bit you on the left sides.
我来抓一下 so let me just grab
这些词，我们已经讲过了 these words out here and we already
差不多就是这样 pretty much have that
确保流畅 make sure that flows nice
我还想把它稍微提一下它看起来有点像一个士兵 and also I want to take that up a bit it looks almost a bit like a trooper
三角形状 triangular shape
在后面 at the back
让我们用英国金融时报的修改人来做吧。 so let's just do it with the ft the modifier.
这些我想要把所有的东西都推到这里以便它能完美地对齐到这里 and these I actually want to push all the way out here so that it perfectly aligns here on the
前面， front,
或者在右边， or on the right side,
并把它提出来 and also bring it up of it
现在在边缘约束模式下。 right now in the edge constrain mode.
让我们给它一个一年的机会让它变得更圆一些 and let's give it a chance for a year make it a bit rounder
再一次 and again
在树篱的限制下，我们用文字来表达。 out of the hedge constrained maude so let's just position in words.
我认为边缘受限的快捷方式绝对是我最常用的方法之一 I think the edge constrained shortcut is definitely one of my most use
捷径 shortcuts
或者你把它叫做开关 or as you call it the toggle
夹在中间 toggling between
边缘约束和知识约束 edge constrain and knowledge constraint
非常频繁的行动。 very frequent action.
让我 let me
加 add
这里有一个流连接 a flow connect here
让我们把这些鸟连起来。 and let's connect these birds.
让我 and let me just
使平滑 out to smooth
这里的一切， everything here,
现在我要做的是 and now I'm going to take
这些面孔 these faces
给它一个吸烟室。 and give it one smoking room.
并且 and
让我们确保这里的所有东西在xx上都是完全对齐到零的。 let's make sure that everything here is perfectly aligned to zero on the xx is.
为了让你点击右边的按钮。 and for that to get you to click the buttons on the right side.
单词使用捷径。 word use a shortcut.
正如我们在入门课程中看到的 as we've seen it in the introduction bd home
让我们继续。 and let's continue here.
仍然有一些工作在这个形状上 still a little bit work left here on that shape
更多的重新定位 some more repositioning
可以接受这些鸟你的个人日元 can accept these birds your individually yen's
把它们拉到我想要的地方 pull them to where I want them to be
给定一点a given a bit of a
曲线 curve here
这条边长 that edge long
这看起来有点太低了 and that looks a bit too low
这一年。 for the year.
所以我要做的是 so what I will do is
首先，推动这些 first of all push these
边缘 edges
外出 out
然后我要 and then I'm gonna
在上面使用这个房间 use the chamber on it
马上 in just a moment
把这些词连起来。 and connect these words.
现在看起来更漂亮了 and now it looks nicer there
今天早上的一些小组又重新写了一遍所以我们真的适用于这个物体， and some all this morning groups got over written again so we're just really applies when groups here to that object,
或者这些脸 or these faces
并且 and
让它变得更像曲线 make it a bit more curve
在这里 here
这已经被测试过了 and that's already tested without
检查修改器。 checking for modifier.
我们把最小值设为最小值 so let's put the minimum
把角关掉。 angle off.
当我把它放在绝对的位置上 and when I put it here to absolute
边。 edges.
让我们看看它是什么样子的 and let's see what it looks like
很好 pretty good
让我来 let me already
在这里旋转因为我们的顶部并没有真正对齐到 rotated here because our top part was not really aligned here properly to the
接收器也有这个角度， receiver which also has that angle,
所以现在我们实际上是在看这个停止，就像它在参考图像上一样， so now we're actually looking at the stop as it seemed on the reference image,
我要把它放在这里重新定位一下， and I'm just gonna bring it down here repositioned at a bit more,
继续 go on
蚀刻护城河和 to etch moat and also
让它成为一个很好的丰富的流你一般来说 make it a bit of a nice rich flow you in general all
在这两者之间有更多的空间 have some more space there in between those
虚拟的 virtus
读访问 read access
我要 and I'm gonna
添加另一个循环语句 add another edge loop bring it
一直往下。 all the way down.
当处于边缘约束模式时 while being in the edge constrained mode
把它放在这附近。 and have it somewhere around here.
会破坏对称修饰符 gonna collapse the symmetry modifier
崩溃， collapse too,
这样我们就能保持房间的运转，而旅游巴士也在上面。 so that we can still maintain the chamber and the tour bus was on top.
现在你是被选举出来的 and now you're that face elected
我带来 I bring
一切 everything
上位 upper bits
在这里的某个地方 somewhere in here
让我们把它拉近一点 and let's bring that a little closer down here
我想做的是 and what I want to do
是在这里和挤压 is give that here and extrusion
这些碱基 these bases
不能把它放在0上 cannot put there stood amount to zero
而现在，在本地市场上。 and now while being in the local market still.
我要拖拽 I'm just going to drag
这里的几何图形 this geometry out here
我要查一下那一年， and I'm gonna check for that year,
转到井上 go over to the well mod
确保一切都好于一起。 and make sure that everything is well than together.
现在我要修正is and now I'm just gonna fix the is
这条边比我们的长 this edge longer than we got
去掉一些边，并计时好。 remove some edges and timed well that.
现在我们可以把那只鸟连在一起， and now we can connect that bird would that one over here,
我也要在这里清理一下 and I'm also gonna clean up here the
股票的底部 the bottom part of the stock
是手枪的握法。 are the pistol grip.
现在只剩下这些面我要插入它们 so now it only left with these faces and I'm gonna insert them
仍然是在局部负荷的情况下把这些面拖出来 and still being in the local load amount of drag these faces out
一年多做同样的事情， do the same thing again over a year,
现在我们有了这个形状 and now we have this shape
做得很漂亮。 done pretty nicely.
圆锥形的 conical
在这里折叠一些边 collapse a few edges here
这样我们就不会有这么高的花粉量了。 so that we don't have such a high pollen count there.
让我 and let me just
再次跳出青蛙的视角然后删除右边的部分 jump in the frog perspective again and just delete the right side
所以我们不需要做这个工作。 so that again we don't have to do that work.
多次 multiple times
我们再一次应用游泳组 just we applies swimming groups again
并将其对称性 and put the symmetry
开始！ begone !
让我找到这个 let me just we find this
在这里进行三角测量 triangulation here a bit
把这条边去掉， removed that edge,
现在看起来很不错。 and now it looks pretty nice.
在x轴上稍微挤压一下 give it a bit of a squeeze here on the x axis
这样一来，没有接收器，它就更适合了。 so that it fits better without a receiver.
我们也已经添加了 and let's also already adds
这个元素在他们的控制下， this element here on their grip,
我们 which we
不会有 won't have
在我们实际的低聚网中我们稍后会用到 in our actual low poly mesh that we would then later use for
任何给定的游戏使用或狨猴 any given game use or marmosets
但是我们实际上已经添加了一个漂浮器 but we will actually already added as a floater
我们会 that we'll just
把我们的双曲几何图形烤一下。 bake on to our hyperbolic geometry.
我们会更深入地讨论飞蚊症 we will be talking more in depth about the floaters
一旦我们到达你的多边形， later once we get to thy poly,
但它已经在这里了 but it's already at some here
调整 gonna adjust
这些词使它适合。 these words so that it fits.
这应该很简单。 it should be pretty straightforward.
复习 go over
把它放在这里，把它放到这里 to edge mod and bring it in here
我想把这些放到这里， and I want to bring these up to here,
这个我要讲的是 and this one I'm gonna
我们的假设 our supposition
现在我要切换或面对更多 and now I'll just switch or to face more
和我们的inset一起工作 and work here with our inset
带来 bring that
在。 in.
拿着这些 take these
边。 edges.
做一个翅膀选择 make a wing selection
添加一个额外的边循环 add an extra edge loop
s， s,
我们确定了一个边缘模式 and we make sure about an edge modes
作为约束 as constraint
把他们推到 gonna push them
在这里 out here
也可以应用一盏灯 and also apply a light
灰色的材料，这样我们就能更好地看到正在发生的事情。 gray material so that we see better what's going on.
那天下午有一个赞美诗。 got a chant for that afternoon.
现在我们有了 and now we have
这个形状 this shape here
差不多 pretty much
已经为我们的高质量的漂浮者做好了准备。 done already for our high quality floater.
让我们 let's
看看它是什么样子的，我们的cimpor在上面， see what it looks like here with our cimpor on it,
多平滑 how smooth
边缘，把数量降下来 edges and bring the amount down
这很好 and that's pretty all right
并且 and
我们在这里的位置是一个位子句 position that a bit clause we're here to the grip
之后在普通地图上 so that later on normal map will
大的 big
很好 just fine
现在我看着它 and now that I look at it it
在底部这里看起来有点过低 looks a bit too low poly here at the bottom part
所以我要做的是 so I will do
还有一些改进。 some more refinements.
添加一个额外的边循环，然后在这里弹出。 add an extra edge loop and pop that out here.
为了这个 and for that
上面的边缘和村民 upper edge here and villagers
为它而战 chan for it
只是 and just
我们把这些鸟连在一起。 take these birds we connect them.
现在我们已经完成了我们的股票 and now we're pretty much done here with our stock
是手枪河。 are pistol river.
我想我一直对这些名字感到困惑 I guess I keep getting confused about these names
最后一次是今天早上的小组。 and one last time here this morning group for the top part.
现在我们剩下了一个很好的手枪握法。 and now we're left with a really nice pistol grip.
让我 let me just
加 add
另一个在底部 another screwed to the bottom
一部分的抓握， part of that grip,
哪个 which
我在参考图像上也看到了。 I also see on the reference image.
给它正确的旋转量并确保 give it the right amount of rotation and make sure
它是 it's
就在x轴的中心， right there in the center on the x axis,
我只是想 and I'm just gonna
抓 grab
这些边 these edges
制造者 maker
戒指选择进入了当地市场 ring selection go over to local markets
然后把它拖出来这样它在我们的正常情况下会有更大的深度 and drag it out a bit so that it has more depth later in our normal that
应用丧服广告 applies mourning robes ads
和詹妮弗一起，让她看起来很漂亮， in combination with jennifer into a smooth looks great,
现在想要在这里处理我们的触发保护元素 and now want to be working on our trigger guard elements here
只会 gonna just
从飞机开始 start with the plane
继续 and continue by
让它看起来像这样。 making that plain look exactly like that.
触发保护元件 trigger guard element
与ar参考图像一起进入隔离模式， go into isolation mode together with ar reference image,
把它放在正确的位置。 put it in the right position.
然后给出 and then just given the
一年的适当冠军 proper champ for a year
然后 and then
左边的章节有点 chapter on the left is a bit
比右边的要宽 wider than the one on the right side it
我们在这里单独做一下 so we'll do that individually here
让我们慷慨一点，我们希望它真的很好，很圆。 and let's be generous we want that to be really nice and round.
这里的这个很好，因为它是 this one here is fine because it's
不是这么大的曲线 not such a huge curve
就像左边的那个。 as the one on the left.
现在我只是跳投 and now I just jumper
或者实际上 or actually
给它一个 give it an
熏香 incense
领导内部环节 to lead the inner segment
和上面的一样 as well as the top one
有 have the
顶鸟 top birds
一条线 a line
水平地，现在我们就剩下那个形状了 horizontally and now we're left with that shape
这样我们就可以 that we can then
推出 push out
回到我们的边缘模式 go back into our edge modes
把你拖到这里， and just drags on too you out here,
确保它是 and made sure that it's
完全地 perfectly
与x轴上的零坐标对齐， aligned to our zero coordinates on the x axis,
然后我将继续在中间做一个边缘连接。 and then I will already continue year make an edge connection here in the middle.
水平地把它拉下来。 a linage horizontally bring it down.
当存在和面对模式时。 and while being and face modes.
我只是想抓住 I'm just gonna grab
在这里，挤出来 that face here and extruded out
这有点太离谱了，萨德在上升。 and that came out a bit too far saad was going up.
龙 dragon
男爵 baron
把它变成灰色 and also make it a gray
材料耳 material ear
那 that
对象， object,
再添加一个循环边 gonna add another edge loop
把我们这里的脸拿出来 and just take that face that we have here
首先是位置和更好的年份 first that's position and better year
开关 switch
到那张脸 over to that face
并且 and
挤出更多的几何形状， extrude some more geometry out,
我们已经可以看到我们一年的时间了。 and could already see what we're up to a year.
我想要研究这个问题 I want to be working on that
释放 release
元素 elements
不能 cannot
没有詹妮弗的工作一年， work without jennifer a year,
确保它是漂亮的和弯曲的。 make sure it's nice and curved.
让我们给它 and let's give it
6条边，所以它是真的 six edges so that it's really
不是很低。 not too low point looking.
让我们来看看上面的部分， let's work on the top part here,
它也有 and it also does
这个 this
曲线上的曲线， curvy thing there,
让我在 let me at an
绝对的 absolute
走到蚀刻壕沟 go over to etch moat
结束 ends
一条线 a line it
垂直地， vertically,
现在我们要做的是 and now it was going to take that
再次面对 face again and
做同样的动作 do the same action that we were
已经 already
做， doing,
拿着那张脸，它又站了出来， take that face and again it stood it out,
从这里到最上面的透视图 go over here to the top perspective
或者实际上是底部的观点， or actually the bottom perspective,
确保它没有接收器就能存活。 and make sure it's alive without receiver.
让我去掉这些我们不想要的属性 and let me get rid of these attributes that we don't want to have here
她让我撤销这个 and she let me undo that and
签证就像这样。 visa like that edge.
现在我要把它连接起来 and now I'm just gonna connects
把这两个词连接起来 connect these two words here
然后给出 and give that
纯倒角 actual pure chamfered
但我们不想要那么多。 but we don't want to have that many.
在那里倒角，所以我要把它留在这里 chamfered edges in there so I'm just gonna leave it with
二 two
在这里做同样的事情。 and do the same thing over here.
摆脱这些 get rid of these
边缘 edges
把它们连起来 and connect them
在那里面 in that
在那里 corner there
然后给它一个一年的机会。 and then also give it a chance for a year.
让我们来看看。 and let's have a look around.
它实际上并没有出现在那个地方，那个元素看到它就会 it actually doesn't come that far out there that element saw it'll just
选择这些鸟 select these birds
并且 and
拖拽 drag it
在这里 in here
xx是 the xx is
还有 and also
我要把它去掉，在中间出现， I'm just gonna get rid of that actually appear in the middle,
把这些鸟拉近一点 and bring these birds a little closer
相互之间。 by each other.
现在我要使用流连接 and now I'm just going to use the flow connect
一 an
引导 led
弗雷迪马克提醒我们，这是正确的曲线， freddie mac's did to remind what is the right curve here for that,
现在它看起来更漂亮了，边缘定律。 so now it looks a little nicer there the edge law.
让我们把对称修改器放在上面 let's put the symmetry modifier on
而且 and that
不，它已经在我们的扳机保护上相当先进了。 no it's already pretty advanced here on our trigger guard.
这里还有更多的工作要做 just a bit more work left here on
确保这个几何图形是 making sure that this geometry is
很好 nice
在这上面挤出更多的阶段 gonna extrude some more phases out here on that
顶面 top face
现在要选择这些边。 and now shall select these edges here.
做一个边缘循环 make an edge loop
或者是边缘连接 or an edged connection
我们在参考文献中看到的这个元素。 and work on that element that we see here on the reference.
我们把这些边拖到这里 so let's just drag these edges over here
现在我要把它挤出来 and now I'm just gonna extrude it out again
并且 and
使用我们刚才使用的相同的词流 use the same word flow that we just used
为了得到这些曲线 to get these other curves
在另一个循环边， at another edge loop here,
把它拖到这里 drag it out a bit more here
再一次，我将把这些边去掉 and again I will just get rid of these edges year
连接 connect
那两只鸟，也见了面。 those two birds and also met site.
现在我要在这里检查一下， and now I'm just going to check for it here as well,
实际上会给它自由边界 actually gonna give it free edges here
现在我要把这两条边 and now I will take these two edges in an
这是使徒陈。 apostle chen for it.
我要检查一下 I'm gonna check for it
所有这些都是为了让这些边的肉 all away so that these edges their meat
在 at the
海底 the bottom
几乎被打败了 are almost beat
这两只鸟是马特，所以我们可以欢迎。 those two birds matt so we can just welcome.
这些都是 and these are just gonna
崩溃。 collapse.
还要确保我们有“天鹅绒”这个词。 also make sure we have this word velvet.
我就给它 and I will just give it
一个微笑重现 one smiling reappear
在整个物体上 on the whole object
资产 assets
现在我们从左边看这里 now that we look at it here from the left side
我们可以把所有对称修饰符都折叠掉 we can just collapse everything that symmetry modifier
在这里跳过这一段 and to leap that piece here
因为 because
它只出现在右边。 it's only appearing on the right side.
我想做的另一件事是 and another thing I want to do
是到这里来面对模式 is go over here to face mode
然后选择这些 and select these
上部段 upper segments
然后我就会 and I will then
首先，确保所有的东西都是我们想要的， first of all make sure everything is selected what we want,
然后 and then
分离 detached yet
保持开放 and kept the open
在这里 faces here
是开放的地方 are the open spots
因为我想让它成为一个独特的元素 because I want that to be a unique element
在所有参考图像中都可以看到 as seen on all reference image
后来我们有了两个比樟脑更重要的东西 later once we have our two was more than camphor on that it will actually
更明显的是，现在我只是 be more obvious so for now I just
把它粘在一起 attach it back together
并且 and
给她一个合适的陈在这些边 give her the proper chen for here on these edges
让我把这些鸟放在这里，我在底部的角度 and let me take these birds here I'm in the bottom perspective
我将把你们介绍给这些量表 and I'll go over you to those scale
让他们多一点 and bring them in a bit more
将这些脸作为一个克隆体连接起来 going to be attached these faces as a clone
工作 and work
在 on the
释放按钮 release button that we have
在那里。 in there.
首先，它会使这些鸟崩溃。 so first of all it was going to collapse these birds.
我们只是想要有合适的维度。 we really only want to have the proper dimension.
并且 and
为此我们可以 for that we can
一定要利用它 definitely make use of that
几何学 geometry
一定是水平年的直线 must be a line that year horizontally
在一年的时间里， and vertically for a year,
在另一个循环边， and at another edge loop here,
把它放在位置上 put it into position
挤压这些面 and extrude these faces
在这里 out here
我放一个0，把它拖下来 and I put a zero and just drag it down
挤压 the extrusion
把它放在右边， bring it a bit to the right,
现在要确保我们有这条曲线 and now make sure that we have that curve
在那里。 there as well.
让我们给它一个 let's give it a
詹妮弗在这里 jennifer here
让我们给它 and let's give it
在这里的科学研究中 for science here the chamfered
确认 confirm that
在这里做同样的事情。 and do the same thing over here.
成功 make it
又好又圆。 nice and round.
现在我们要做的就是在这个几何图形上进行清理 and now it's just the matter of cleaning that up here on this geometry that
室内产生的 the chamber produced
我们不需要， that we don't need,
现在我们有了一些重叠的几何图形所以我们要确保我们将一些鸟连接起来 now we have some overlapping geometry there so we have to make sure we connect some birds
为了防止这种情况发生 to prevent that
帽 cap
那 that
上部 top part
所以它充满了几何图形 so it's filled with geometry
现在我们还想要 and now we want to also at these
那里的船 boats there
他秃顶了 he's bald that's
为此，我要做一些新的民意调查。 and for that I'm gonna just create some fresh polls.
我不会使用之前创建的螺丝，因为 I won't use the screws that be created earlier because
他的光头看起来不一样。 he's bald heads look different.
也可以用圆柱来做 just gonna work with a cylinder as well
把它放在合适的位置 put that into place
并且 and
把它放大一点 scale it up a bit
然后 and then
崩溃 collapse it
给一个编辑威尔波利 to an editor will polly
一旦我们有了 once we have
我们的 our
参数对你是正确的 parameters correct you're
选择那个面，然后听到选择，删除所有的东西这样我们就只剩下了 just select that face and heard the selection and delete everything so that we're just left here with the
前盖 front cap
圆柱的一部分。 piece of the cylinder.
现在你是内嵌的。 and now just you were the inset.
我就会跳出来， I will pop out of it,
然后给它另一个，设置在这里 and also give it another and set here
就这样崩溃了 just collapse that
在中间的中间，所以我们只有一个伯特 inside here in the middle so we only have one bert
空气 air
让我们来利用它 let's make use of that
点环到耳 dot loop to ear
在丝带下面。 under on ribbon.
所以我们可以 so we can
选择一个边点击那个按钮 select one edge click that button
它选择 it selects
我们还能做的每一件事 every second action that we can also
崩溃 collapse it
为了减少细胞的数量，你可以把你的出价算在那个光头上 to minimize cell poly count your bid on that bald head
但是要保持所有边缘的形状 however on keeping all the edges on the outer shape of that
螺丝 screw
或者是笨蛋。 or bonehead.
因为这就是我们真正想要的是有很多鸟的完美圆形物体 because that's what are we really wanna have that perfectly round object with a lot of birds
除此之外，我们有一个很好看的外观 and other than that we have a pretty nice looking
那一年的碗。 bowl that year.
给它一点尺度， just give it a bit of a scale,
确保它是正确的 make sure it's the line properly
然后复制一年 and then just copy it over a year
移位和拖曳 shift and drag
然后复制到另一边。 and also copied over to the other side.
让我们看看 and let's look
在 at
另一个 another
螺丝元素 screw element here
再一次，我在用一个圆柱 again I'm working with a cylinder
反转和删除 invert and deletes
带来 bring that
在这里 out here
把一些新鲜的东西拖出来， and drag some fresh to you out,
复制到另一边，旋转一百八十度 make a copy here to the other side rotated hundred eighty degree
阿姨们， aunts,
好了。 there we go.
并且 and
下一个 next
我将接受 I will accept
整个的 the whole into our
手枪库存 pistol stock
就像这里的场景， as scene there on the reference,
所以这个 so that this
触发警卫并不会神奇地 trigger guard doesn't just magically
在这里相交。 intersect there.
让我们回到这里，商业思想 so let's go back here business thought
并且 and
首先，我想要的是刮擦 first of all I want is scraped and that
在这里。 edge here.
确保它是 make sure it is
完全对齐。 perfectly aligned.
同样的道理也适用于这些边 and the same thing goes for these edges
能 can
垂直对齐， align it vertically,
现在我们可以把这些 and now we can just take these
脸是对冲，然后删除它们 faces were hedges and delete them
并且 and
拖出一些新的几何图形 drag some fresh geometry out of these year
我们走吧 let's go
让我们切换到隔离模式看看效果更好 let's go over to the isolation mode to see that better
再次对齐这些边我们刚刚拖出来 again align these edges that we just dragged out
把它们焊接在一起 weld them together
把它清理一下 and just clean it up a bit here
目标井 target well
这些话又回来了 these words back in place
现在我每年都要讲这个 and now I just bring over that at year
格雷格，一些几何图形 greg some geometry adami
把它设为零 put it to zero
目标井， and targeted wells,
这个 this one
在那边。 over there.
这就留给我们 and that leaves us with
这个元素 this element there
把所有的手枪都切掉。 cut into all pistol stock.
现在我们只需要 and now we just have to
回到我们的 go back here to our
触发警卫 trigger guards
同时也给它一些旋转， and also give it a bit of a rotation here,
我要右键点击这个旋转按钮 I'm gonna right click that rotate button
把它放在两个 and put it two to
二度的 two degree
现在把它放在这里，没有接收器。 and now position it here without receiver.
我将把这部分放在最上面 and I will actually take this part here on the top of that
触发防护装置 trigger guard as well
要确保它看起来是在曲线上， and make sure that it looks like it's actually going in there with a curve,
如所见 as seen on
参考图像， the reference image,
让我转到左边的autoview视图 let me go over to left autographic view
我删除了顶部的脸或者现在是一个边缘错误 I deleted the top face or now an edge fault I can just
拖出更多的边 drag some more edges out here
然后手动 and just manually
对齐它们，这样我们就有了一条曲线 align them so that we have a curve there
让它变得更圆的章节 chapter that make it a bit rounder
同时也想把它提出来。 and also want to bring it up a bit.
这很好。 so now that's pretty good.
让我们来研究一下触发器 and let's work on the trigger
为此，我要创建另一个南方人， for that I'm going to create another southerner,
确保它有足够的边，所以它是圆的， make sure it has enough sides so it's nice and round,
一场游戏， a game,
选择 select
反转和删除，所以我们只留下它的正面 invert and deletes so we only left with the front face of it
在这个集合中，现在在这里 in set that and now here with the
英国金融时报修改人。 ft the modifier.
我们已经可以把它推到合适的位置了让我来了解一下 we can already pushed it into place so let me get a bit of that
从触发器的形状开始。 shape there from the trigger.
把我们不想要的脸删掉 just gonna delete the faces that we don't want to
把它拉下来一点 bring that down a bit
让我在这里做一个选择，在左边的这些边， and let me make a selection here for all these edges on the left side,
这样我们就可以垂直地 so that we can vertically
使它对齐 align it
这是行不通的，因为圆柱上有一个旋转， and that doesn't work because the cylinder had a rotation on it,
我们必须坐下来，我们说出口， which we have to we sat with we said exports,
所以我们说的是x形式的崩溃现在我们可以垂直对齐了 so a collapse we said x form and now we can actually align vertically
然后继续处理这些边和顶点。 and continue by getting rid of some of these edges and vertices here.
我可以把它放在右边吗？ can I leave it on the right side
那年的一条线 a line that year
或者求助于我 or resort to me
继续在这里画出这个形状。 and just continue working on that shape here.
把它带来一点。 bring it in a bit.
并且 and
在边界上 in border mod
我就在那时 I will just then
在这里画出一些几何图形 push out some geometry here
把它设为零。 put it to zero.
选择站在一边的鸟，把它带到更远的地方。 select the birds on the side and bring it in even further.
那 the
触发器并不是真正的白色 trigger is not really that white
让我们看看我要找的是对称臂 and let's see I'd looks for the symmetry arm
实际上会把它弄塌 gonna collapsed it actually
删除顶部的面 delete the top faces and
一年多的时间 over a year in the scale
然后我们可以把更多的约翰拖出来 and shift we can then drag some more john likely out
为了得到我在参考图像上看到的形状 to get that shape that I see on the reference image
继续把它塑造成一个小点。 just continue to shape it around a bit.
让我们把它提出来。 let's bring it up also.
这也给了它一个很好的机会在一年的时间里至少有一个部分 and also that give it a good chance for a year on the side at least one segment
选择这些边并检查它 select these edges and check for it
目标很好 and just target well
今年又回到了一起， this year back together,
我们不需要添加循环歌曲就会删除它 and we don't need that adds loop song was gonna delete it
控制后空间 with control back space
把它放大一点。 scale that out a bit more.
整个过程也可以在x轴上使用一些scaly and the whole thing also can use a bit of a scaly on the x axis
这看起来有点像在底部切掉所以我们就 and that looks a little bit to cut off here at the bottom so we'll just
宝石 gem for its
沿着这些边 along these edges
这是一起的 and well this together
让我们来看看这个剪影 and let's have a look here at the silhouette
它看起来仍然很奇怪 it still looks the lomas strange there the
曲线。 curve.
首先让我把它写在这里。 first of all let me bring that down here a bit more.
现在我们把它画得更圆一些。 and now let's make that a bit more round here.
说到回合。 and speaking of rounds.
我想 I want to
把它放在上面 put that virtually all the way up there
然后拖动这个概率 and drag this one odds
你也一样 as well you're
只是要去掉这些边 just going to get rid of these edges
大空间 with big space
并且 and
现在重新连接一下 now just reconnect it
在我们稍微缓和了一年后， up to a year after we tempered in a bit more,
这里有一些重新连接的市场 and just some reconnecting off markets here
在那附近。 have it around there.
现在我要用我们的接收器，在那里剪一个洞，扳机应该是进去的。 and now I will actually take our receiver and cut a hole in there with the trigger is supposed to go in.
让我们把一些边连接起来 so let's connect some edges here
把那个洞剪开。 and cut that hole in there.
首先我要讲的是 so first of all I'm going to
检查 check
为了这条边。 for that edge.
确保我们的触发器在正确的位置。 make sure our trigger is in the right position.
现在我要用这些面 and now I will just take these faces
给他们一只昆虫 giving them an insect's
转换为顶点 converted to vertex
并且 and
x轴上的skp是 skated on the x axis is
给另一个，设置这些面 giving another and set these faces
把它提出来。 and just bring it up.
这样我们就可以 that way we can
快速创建一些 quickly create some
几何年 geometry year
我来选择这些边 let me select these edges here
转换为顶点， converted to vertex,
现在 and now
有一个规模和我们的边界限制 with a scale and our edge constraints
在这里加宽一点 widen it up a bit here
把整个东西都用外光滑 gonna take the whole thing given an outer smooth
下一件事 and as the next thing
我们将在这里工作，在我们的安全开关上工作。 we are then going to work here on our safety switch.
给定一个圆柱 given a cylinder with some
这是30岁的好地方 good sides to it here at thirty
二。 two.
她会没事的 she'll be fine
我们通常的做法是用灰色材料。 and do our usual thing year apply gray material.
选择字体字体 select the font face
反转和删除。 invert and delete.
现在我要在这里建立一个更好的联系 and now I will make a better connection here
领导 to lead the
我们不想要的脸 faces that we don't want
我们不想要的脸 the face we don't want to
快速浏览一下我们的参考资料 have a quick look here at our reference
象 image
这就说明了 and that reveals that
它在进行 it's going
在接收器下面。 under the receiver there.
首先，我要把它作为每年的数据 so first of all I'm just gonna take that as each year
把一些几何图形拖到这里 and dragged some geometry out here all the way
在x轴上。 on the x axis.
注意我这里有一个额外的边 and notice how I have an extra edge here
因为现在我要 because now I'm gonna
把更多的东西拖到这里，基本上就是这样 drag some more up here and that's basically where that
安全 safety's which
形成曲线 makes that curve
另一个接收机 another receiver
疲惫的财富 tired wealth
回到原位 that back into place
把这个顶点一直往上拉 and just bring that vertex up all the way year
把它拉下来一点 bring that down a bit
并且 and
让我们看看接下来要做什么？ let's see what we do next ?
首先，我们把它写下来 first of all let's bring that down here were
在左边。 to the left.
虽然是边缘约束 while being an edge constraints
接下来，我要把这些面朝上 and next I'm going to take the faces here
给它一个 and give it an
插图。 inset.
所以我们基本上已经弃用了几何学 so that we have basically deprecated geometry but
内部的小版本 smaller version of it in the inside
在这里收集一些边。 collect some edges here.
在屏幕模式的边缘， and while being an edge on screen modes,
确保它们是直的 make sure they are straight
让我们只在这一点上工作 and let's only work here on that little bit
这实际上是一个截断 that's actually a cut off
元素。 element.
所以我将把self。这里连接起来这是作物工具 so I will just connect self verts here were the crop tool
为它准备好我们的形状。 and prepare our shape for it.
现在我要把这些面 so now I will take these faces here
并且 and
给他们一个斜角。 give them a bevel.
这场战役几乎就像挤压一样 the battle is almost like the extrude
但就像这个名字所暗示的， but like the name suggests,
有一个斜角的半径 has a bevel radius on it
或者角度。 or angle.
所以我们没有， so we don't have,
就像完美的90度 like the perfect ninety degree
挤压 extrusion on it
但实际上已经有了一点 but actually already a bit of a
锥形的 tapered
元素。 element.
让我们再来做一些 let's do some more coming here on that
只是 just
仔细观察 eyeball it
实际上我只是想 and actually I'm just gonna
目标是死的东西 target well dead stuff here
已经清理了它的几何形状 already clean up the geometry of it
控制这些边的空间 control back space on these edges
那块 and that piece
也可能需要另一个 also can need another
在上面斜着。 bevel on it.
让我们到右边的视图， let's go over here to the right view,
给定适当的数量 and given the proper amount
能 can
把这条边去掉 get rid of that edge here
这可能是一个有点圆的人，刚刚出去， and this could be a bit rounders on just gone out,
给它一个房间。 give it a chamber.
摆脱这些 get rid of these
字 words
在那里 there
让我来 and let me take
我们这里的这些面孔 these faces that we have here
就目前而言，苹果是致命的 and for the moment apple just a lethal
我来检查一下这个顶点。 and let me check the vertex here.
展览会。 the exposition.
零点二十七 zero point twenty seven
这是一份 and that a copy that
把它粘贴到这张脸上， and paste it onto that face here,
所以这个面和那个顶点的位置在袋子里。 so that the position of that face and that vertex there in the bag.
背后的敏捷性 how agility in the back
处于同样的位置 are on the same position
接下来 and next
我要做的是 I'm gonna maker
边缘 edge
中间的连接年。 connection year in the middle.
把这两个伯特剩余 take these two burt excess
给他们一个房间。 and give them a chamber.
现在我也要给出这个 and now I'm also gonna give that
顶点u室 vertex u chamber
已经 already
往左推一点 pushing a bit to the left
你可以在这里做一个投标 and just making a bid round are you with
更加回火 even more tempering
删除那个顶点 gonna delete that vertex
这就给我们留下了我们可以在参考文献中看到的曲线 and that leaves us with that curve that we can see on the reference
接下来是8条边 next starts eight that edge
再把它放到左边， and bring it a little bit more here to the left,
转换为判决选择 converted to a verdict selection
然后把这些分数粘贴到这里 and paste also these scored in its there
对于x轴 for the x axis
我想在这些分数上加一点 gonna chamfered a bit here on these scores
为了达到目的 to make it
所有的人看起来都很圆。 all a little rounder looking.
这是一只狮子，一年多一点 it's a lion and a bit more year
看起来这是真的 and it looks like this is actually going
往下一点 down there a little bit
这些元素， that elements,
让我用cat工具 so let me use the cat tool for that
只需要一点a and just take a bit of a
元素 element
在这里 out here
一个目标 and a target
在下面这里 well down here
现在是时候使用我们的shell修改器了 and now it's time to use our shell modifier on it
有 with an
内心的男人 inner a man
点零五厘米， of zero point zero five centimeters,
确保你有选择的界面在底部检查。 and make sure you have select interfaces check there at the bottom.
因为我们接下来要做的是 because what we're gonna do next
是 is
有了这个选择 with that selection here
将它折叠起来 going to collapse it
分离这些接口 detach these interfaces
然后删除 and delete the
选择引导。 select into leads.
这就把我们的安全开关和中间的补丁放在这里 and that leaves us here with our safety switch and these patches in the middle
这部分， the segment,
现在我去借更多的钱而不是保留它 and now I go over to borrow more than just kept it
这让我们有了一些 which leaves us with some
又好又便宜的几何图形 nice and cheap geometry
我们要做的就是 and all that we have to do
是 is
把这些词连在一起 connect these words together
在后面的结构中，外壳修饰符的几何形状 the geometry that the shell modifier graded there in the back
可能会太贵，也不干净， would have been way too expensive and also not clean,
为了这个 and for that
这是我们几乎看不到的几何图形 kind of geometry that we will barely ever see
这是完全可以的 it's perfectly fine just do
执行我们刚才做的动作 perform that action that we just did here
创造一些 and create some
那里的几何图形很便宜。 geometry there that is cheap.
把它给她。 just gonna give it to her.
有臭味的房间 smelly room here
还有一年。 and also a year.
现在我要创建另一个圆柱体来处理这个学校的元素。 and now I will create another cylinder and work on that school element here.
关节 the joint
这救了他的女巫。 of that saved his witch.
我只是想 and I'm just gonna
把后面的脸删除，把这些边彼此靠近， delete the back face there and bring these edges closer by each other,
看起来我们可以 and that looks like we can
执行另一个任务 perform another
在那件事上。 inset on that thing.
让我们在巴伦的位置上。 let's just position at baron.
现在我要拖拽 and now I'm just going to drag
在这里，昆虫 that down here where the insects
再来一个，把它推出来。 and another one and push it out.
我来得到这个元素 so let me get that element
我们在参考图像上看到的 that we see on the reference image
刚刚离去 just gone
为了使它平滑？ out to smooth it ?
让我们把所有东西都推到这里 and let's just take everything and actually push it
这里是它的位置。 over here to where it belongs.
因为我们主要是作为一个国家模式的结束 since we were mostly working on that as a nation mode end
我以前没有注意到。 I didn't really notice it before.
现在它已经就位， so now it's in place,
我仍然不相信这些年来我将会 and I'm still not convinced with that look years though I will
接受 take it
并且 and
我们 we
形状和一点，让它看起来一年更圆。 shape and a bit so that it's looking a little rounder a year.
这已经差不多了 and that's pretty much already it
接下来我们还剩下这两个元素 next we still have these two elements left
这和我们对它的处理方式是相似的 and that's going to be similar like what we did with the
触发警卫。 trigger guard.
我们只需要挤出一些 we will just extrude some
我们开玩笑说 joked we are
将会变成0 gonna pull into zero
挤压 the extrusion
然后拖动它 and then just drag it
所以这是完美的海峡 out so it's perfectly straits
也要确保这是一个光年 also make sure it's a light year
水平联盟， horizontally alliance,
最上面的脸。 the top faces.
现在我要把更多的阶段排除在外。 and now I'm just going to exclude some more phases out here.
再一次，我把挤出量变成0然后把它拖出来， again I have the extrusion amount to zero and then just drag it out,
给它一个尺度，实际上有一点曲线 give it a bit of a scale and actually has a bit of that curve
我想要保持他们的 that I want to maintain their
继续进行一些热处理 and just continue with some tempering here
就像你在那边缘一样。 and same as you're on that edge.
在底部也是一样 same here at the bottom
挤出 extrudes
确认 confirm
然后把它拖出来 and then just drag it out it's
使用本地的 gonna use the local
模式 mode for that
让我们 and let's just
删除这些面年 delete these faces year and
给它边界模式 give it the border mode here
我说的是桥式模式 are the bridge mode is what I mean
把它盖在这里。 and cap it here.
目标井 target wells
同时也要清理他们的几何年 and also just clean up their geometry year
现在和以前一样。 and now same as before.
挤出 extrude
并且 and
把它拖到z轴上。 drag it out here on the z axis.
一条线。 a line it.
这个实际上是非常直的。 this one is actually perfectly straight.
所以它需要完全对齐 so it needs to be perfectly aligned there
现在选择这两条边，我也要检查一下， and now with these two edges selected I'm also going to check for it,
然后再清理一下 and then just some more cleaning up your
目标世界 target world
这看起来仍然很奇怪并且会去掉这些边的网格 and that still looks weird and was going to get rid of grid of these edges here
这可能会更像一条曲线 and that could be a bit more of a curve
在那里。 there.
所以我们会发脾气 so we'll give it a temper
目标是回到那个问题上 target well that back onto that
新创建的边， newly created edge,
我们不需要这些边来控制空间 and we don't need these edges control back space
只是 and just
做一些 make some
连接在这里。 connection here.
让我从这个国家中摆脱出来作为一个国家 let me just get out of that as a nation molten back here to our
接收器。 receiver.
我要把上面的面分开 I'm going to detach that upper faces on it
作为一个克隆体 as a clone
他接触了一个克隆体 he touches a clone
拖拽 and drag it
一直到这里 all the way up here
因为接下来我们要做的是 because as the next thing we're then going to work on our
上接收机 upper receiver
把这个拿下来。 bring that down here.
抓一些 grab some
几何对象 geometry object
把它放在合适的位置。 and put it into place.
不需要这些边 don't need these edges
在另一个循环边 at another edge loop here
已经准备好了 and already prepare
这个几何图形 this geometry
通过 by
放这些 putting these
有意义的边 edges where they make sense
按比例缩放 just scale it
这里有一点 all up a bit here
不只是在x轴上，使它更宽一些。 are not up just on the x axis make it a little wider.
现在我们来看看这两张脸 and now going to take these two faces
在两个顶点上 which over two vertex
转换取代选择 convert overtake selection
带来 and bringing
印度有x级 india with an x scale
拿 take
这些灵魂 these spirits
这些谋杀案 these murders axes
做同样的事情。 and do the same thing.
现在我要给它一张一年的支票 and now I'm going to give it a check for a year
另一个 and another one
中间的那条边， and that edge in the middle,
我愿意 I will
把它提起来， bring it up a bit,
这样我们就有了 so that we have
这是一条很好的曲线 a nice curve they're
只需要删除左边和右边的这些面。 just gonna delete these faces on the left and on the right side.
这些大写的我们稍后会把它们加起来 these caps we're gonna add them back later
现在 for now this
关于实际形状的问题 concern here about the actual shape
这需要一些手表进入这里 and that requires some watch entering here
另一条边 another edge
在这里循环， loop here,
接下来我要研究的是这个形状， and as a next thing I want to work on that shape,
但首先， but first of all,
我从这里到后面或者从角度来看 I go over here to the back or the from perspective
我们把它塑造成一个样子 and we shape that a bit
就像在参考图像上看到的一样 as seen there on the reference image
在修改器之后把它放到这里 bring that in here with after the modifier
然后把它折叠起来 and collapse it
有一个边缘循环 had an edge loop
把它移到 and bring it moved to the
右边的位置 right position here
我们来选择这些面 let's select these faces
使用我们的ft修改器 and use our ft modifier on it
倒塌 collapse
再给它一次机会 and give it another chance
一年 for a year
去 going to
几何结构 bridge that geometry
把它放在这里 and just kept it here
把所有的东西都放出来，把它推一下。 and just give everything an insect and push it out a bit.
在选择的时候，让它流动到那里 making when selection and give it a flow going out there
这就产生了一些面孔 and that created some faces down here they
不要这样我就吃了 don't want so I will just did eat them
不 straight no
复制这些zet坐标并粘贴到这两个单词。 copy these zet coordinates and paste them on to these two words.
现在我们有了 so now we have it
都是一样的 all on the same
在这里。 level here.
现在，这只是连接这些顶点的问题， and now it's just a matter of connecting these vertex is here,
也就是 which is
左边的自动绘图燃料更容易 easier on the left autographic fuel
开关 switch
在一个选择上 over a select them
连接 and connect
有了连接快捷方式 with the connect shortcuts
轮缘选择，在另一个边缘循环。 rim selection and at another edge loop.
让我们切换到边缘mort and let's switch over to the edge mort
选择 selects
这些边 these edges
连接 connection there
我们已经在这里工作了 and let's already work here on that
紧握的元素或小说，不管它是上帝的 gripped element or the novel whether it's god's
如果有更多的边，你就可以把它们放到合适的位置。 had some more edges you bring them into place.
我们把这些边都画出来 actually let's take these edges here
并且 and
带来 bring them
向上 up a
多一点 bit more
回到这里的判决选择 back to that verdict selection here
把它缩放到x轴上 just gonna scale it on the x axis
并且每年都给它一张支票。 and give it a check every year.
这些都比较严重 these ones are more severe
脑摩根 brain morgan
这就为这个元素留下了圆形的形状 and that leaves us with that round shape there for that element
那一年的类型和好。 type and well that year.
现在我要讲的是 and now I'm just taking that
给它一个inset give it an inset
把它推出来。 and push it out.
增加选择，让它变得更平滑 grow the selection and give it an outer smooth
我把它删掉 and let me delete that
你在这一边，使用了对称修饰符。 you're on that side and used the symmetry modifier.
在我折叠了对称修改器之后我就会把它拿出来 and I will just take that after I collapsed the symmetry modifier
拖拽 and drag it
一直到左边 all the way here to the left
那个元素。 that element.
现在我要把它分离出来， now I'm going to just detach that here,
这样我们就可以工作了 so that we can work
单独地 individually on
每一面 each side's
做一个 going to make an
让你的同盟关系 et connection your alliance
垂直地 vertically
把它带来 and bring it
到那个地方。 over here to that site.
我要用修改后的修改器把它们推到那个位置 and I'm going to use the after the modifier to push them near into that
位置 position
那 that
符合我们的安全开关。 aligns with our safety switch.
如果你看一下参考图像 if you look at the reference image
在另一边 at another edge
连接在这里。 connection here.
把它放到正确的位置 bring it into the right position
在另一个边缘连接。 and at another edge connection here.
把它拉下来一点 bring it down a bit
让我 and let me
使用ft use the ft
在这里发射的deamonte也能得到我们在参考文献中看到的曲线 deamonte fired here to also get that curve going that we see on the reference
崩溃 collapse it
单独来看， and just individually,
把它拖得更久一点 drag it out a bit more year
现在我要用这些面来引导它们 and now I'm just going to take these faces here and to lead them
假的，还有一点， sham for and a bit more,
在下面这里。 and also down here.
重新连接这两只鸟 reconnect these two birds
把这些边去掉 and just get rid of these edges with
大空间 big space
一年多的时间，让它变得更美好，更美好， chamfered even more a year make it nice and realms,
和这里一样 same as here
你们也会做同样的事情。 and also ye are gonna be doing the same thing.
从来没有 never had
连接在这里，这样我们就能更好地得到曲线 connection here so we can get that curve better
有时，边连接会帮助我们添加一个额外的顶点 sometimes an edge connection just helps us to add an extra vertex
然后我们就可以用x空间消去边缘了 then we can just get rid of the edge itself with x space
并领导我们不吃的任何顶点 and to lead whatever vertex we don't eat
下一个要跳出来，但更多的是在接收器上。 and next that one to pop out there but more on the receiver.
所以我要到我们的切面上 so I will go over here to our slice plane
并将其对齐到合适的位置 and align it into the proper position
然后 and then just
把它切成薄片 perform that slice you on it
再做一年 and do another one year
现在我给你们留下了很多 and now I am left you with a lot of
我实际上不知道的边，所以我要 edges that I actually don't why have so I'm just gonna
稍微清理一下 clean that up a bit
通过做一些目标住所。 by doing some target dwelling.
让我们把这个问题提上一年。 let's bring that up to a year.
现在我要用这些面孔 and now I'm going to take these faces year
去 go
这里是我们移动的温暖 over here to our moved warm
把它推到x轴上 and just push it out on the x axis
让我选择这些面给它们一个小的组 let me select these faces and give them one small group
这已经足够好了我们可能需要做更多的工作现在已经很好了 and that's already good enough we may have to do some more work than that later for now is fine
接下来我要讲的是 and next I'm gonna take
这些年 these face year
按班 press shift
然后把它们拖到x轴上这就复制了它 and drag them out on the x axes which makes a copy of it
然后我就会 and I will then
在参考图像上创建一个浮动器 create that floater that we see there on the reference image
把那一年的时间放到一个位置上。 bring that year into position.
它就在我们面前 it's hovering in front of our
几何学 geometry
一项命令 neff an order
因为所有的飞蚊都应该 as all floaters should
那一年就可以定了。 gonna can set that year.
推动它 push it
在， in,
并且 and
确保 make sure that
这是真的 it's really
这条线到所有的接收器。 a line here to all receiver.
并且 and
我不希望它是 I actually don't want that to be
在底部也有，所以我要把这些鸟连起来 beveled there at the bottom as well so I'm gonna connect these birds
那一年的目标很好。 target well that year.
在我做之前，我将会有另一个 and before I do it here I'm just gonna have another
这里是边缘连接。 edge connection here for it.
转到边缘知识 go over to the edge knowledge
把它拖到右边 and drag it to the right side
现在我们要瞄准欧洲的目标 and now going to target well at down europe
这就给了我们一个很好的形状我们在参考图像上看到了 which pretty much gives us this nice shape that we see there on the reference image
所以这将成为所有的漂浮物。 so that will serve as all floater.
我要 I'm gonna
复制 copy it
在这里 over here
在另一边。 to the other side.
镜像在x轴上 mirrored on the x axis
并且 and
然后到这里 then just go over here to the
顶 top
或者是前面的鸟 or the front birds
把它拖出来 and drag it out more
这样我们就得到了这个形状。 so that we get that shape there.
但是我们还没有完全做完因为那个形状 but we're not quite done yet because that shape
有点像曲线。 makes a bit of a curve.
我们把这些拖拽 so we'll just drag these
在这上面。 edges up here.
把它们刮到 scraping them on the
顶 top
这是可耻的。 and shame for it here.
差不多就是这样了 and that's pretty much it
再检查一下 just double check that
也拖了这些 and also dragged these
今年的内边缘一直到接收器 inner edge this year all the way to the receiver
这就是 and that's
很好看，所以飞蚊 pretty good looking therefore the floaters
下一个 next
我要去某个地方 I'm gonna do somewhere
在接收器的这一边，因为我们已经在看它了， here on that side of the receiver since we were already looking at it,
再一次 so again
我将使用这里的资本 I'm gonna use the capital here
然后把一些边放到合适的地方然后我们就把我们不想要的脸删掉。 and get some edges in place where we then later just delete the faces that we don't want.
但是首先我们要做的是 but first of all let's work on that
曲线的 curvier
删除这些阶段的时间 time to delete these phases
再做一些 and do some more
厨师在角落里的戒指 chef ring on the corners
我们把这两只鸟连在一起 we connect these two birds
删除我们不想要的边 and delete the edges that we don't want to have
也要在这里绕圈。 also make it round here.
接下来我要做的是 and the next thing that I want to do
是 is
附加 attach
这些 these
两部分重新组合。 two parts back together.
并且 and
因为这里有一些边我们不能很好地 since we have some of these edges here we can't properly well it
所以我要做的是 so what I will do
只是 is just
选择 select
所有这些边都是我们想要去掉的。 all these edges that we want to get rid off.
确保我们没有删除任何我们实际需要的边。 make sure we don't delete any edges that we actually need.
在我们把这些去掉之后 and after we got rid of these
那么我们就会 we will then
开关 switch
在顶点模式下，像所有东西一样然后用最小的阈值焊接 over to the vertex modes like everything and welded with a minimal threshold of
点零一， zero point zero one,
接下来我要把这些部分加到这里 and as the next thing I want to be adding these pieces here
最上面的部分。 on the top part.
为了这个，我们还需要更多的使用 and for that we gonna made use of some more
切片 slicing
切换到左边的自动绘图视图 go over here to the left autographing view
把它放到x遥控器上 put it into x remotes
在这些元素上做了一些幻灯片 and just performed some slides in here on these elements
就在中间， right in the middle,
下一件事我要用的是我们刚刚切开的那部分的边缘 and as the next thing I'm just going to use the lactance edges that we were just slicing through year
结束 end
交易选择部件 deals select the parts
我们不想去chamfort， that we don't want to chamfort,
因为下一件事我们要去深圳八小时， because as a next thing we are going to shenzhen for eight hours,
这样我们就有了这些 so that we have these
实际上是弹出元素 popping elements actually
有双刃， has a double edge,
但是首先让我 but first of all let me just
到这里来 go over here
选择我们不想要的。 and the select what we don't want.
现在这里的选择很活跃 and now with that selection active here
我们可以过去检查一下， we can go over and check for it,
现在我要做一个新的选择年 and now I'm going to make a new selection year
选择 select
这些特殊的边， these particular edges,
而不是在这两种情况下 not on these two a year on the right sides
只针对我们选择的那些 just for the ones we selected
开关 switch
这里是所有本地模式 over here to all local modes
把它们都标出来 and scale them all
在x轴上。 on the x axis.
现在我要检查一下， and now I'm going to check for them,
所以我们也有它们在那里我们希望它们是圆形的 so that we also have them around there where we actually want them to be rounds
把这些边用贝克的基础，删除它们或税收 gonna give it here of these edges with becks base and delete them or taxes
在一年的时间里做一些联系， and do some connections over a year,
现在就把它清理干净 just the matter of cleaning it up here properly now
因为我们可以在接收器上使用对称修改器只需要在这里手动操作 since we can work with a symmetry modifier on the receiver would just have to go for wit manually here
每件作品 for every piece
两边都有， on both sides,
一年也一样 and same over a year
那个空间，然后删除那个顶点 that space and delete that vertex in that one
现在是时候 and now it's time to
选择 select
只有这些面孔年 only these faces year
我们在高频环上。 that we were in hf ring.
这些 these
接口。 interfaces.
我要喋喋不休地说 and I'm going to babble it
给你一个合适的斜角。 gives you the proper bevel amount here.
匹配我们的参考图像 matching our reference images
我要去 and I'm going to
在这里做一个环选择 make a ring selection here on all these
给你流干网 and give you the flow gannet
把它拿出来，甚至是水 to pop it out even water
把这些顶点连起来。 just gonna connect these vertices u as well.
现在我要在选择年里增长但在面对模式下 and now I'm going to grow that selection year but in face modes
运用自己的情绪 and apply one's mood
我也做了什么 and also what am I do
在环选择中取这些边 is take these edges here in the ring selection
就是上面那个 just that upper ones
让它在流动的空间中出错也可以起到同样的作用 and make it a bit wrong room in the flow can act as well
因为他们的父亲更好 since it better their father
接收器。 receiver.
上接收器。 the upper receiver.
我们还没有完成这些 and we are still not done with these
突出 sticking out
元素 elements
还得做 still have to do
在另一个方向上的那些 the ones that face in the other direction
在前面， towards the front sides,
所以我要在这里建立一些对冲联系 so I'm gonna make some hedge connections here
在上六边 on the upper six edges
它的连接和跳跃， its connection and jump for it out,
这样我们就有了 so that we have
正是在我们想要成为的地方， it exactly in places where we want to be,
在这里，我们得到了一个 and also over here we got one
现在我们要花时间 and now long to take the
每年有两张脸 two faces each year
对于每一部分 for each segment
回到我们的工具栏 and back here to our toolbar must
点击高 click on high
没有被选中的人 unselected with that face election
活跃的， active,
我要选择 and I'm going to select
只有角落，给他们一个脾气。 only the corners and give them a temper.
然后我就跳起来 and then I will jump
在这之外 out of this
点击高度模式 height mode by clicking on
隐藏 an hide
全部 all
就在我没有选择的地方，实际上也有一个捷径。 just above I'd unselected actually have a short cut for it as well.
对于他们的情况，你没有看到我这样做。 for their case you didn't see me doing that.
现在我要把它拿出来 and now I'm going to take that
在这里。 at here.
每一个 each
转换为税 converted to where tax
给它一点刻度这样我们就能得到那个漂亮的，响亮的洛恩 and give it a bit of a scale so that we get that nice and loud shaped lorne
顶点方式 vertex mode
在y轴上的刻度 and scale on the y axis
在这里， and also over here,
现在 and now
我将会在这个几何年的某个时候削弱它现在和sols mange I'm just going to weaken at some of that geometry year that now with sols mange
把它清理干净 and clean it up
那个空间 that space
然后删除这些顶点 and delete those vertices
我们不想要， that we don't want to have,
这里还有一些手动清理。 and just some more manual clean up here.
所有这些部分也是一样的 same for all these segments
上面的接收器是非常独特的 that upper receiver is a very unique
所以它 p so it
需要大量的手工工作 requires a lot of hand work and
我们必须 we have to
在这里做大量的手工工作 do a lot of manual work here without
复制端 copying ends
对称动作只需要一点额外的东西 symmetry action saw it just takes a bit of extra
这里的步骤 steps here
获得了空间和空间 and gained back space and
为了领导这些鸟， to lead the birds,
我们总是在那里 and we are always there
只有这些左耳 only that these left ear
连接 connect
并且 and
删除一些边 delete some edges
和我们曾经去过的那些鸟一样。 as well as the birds that we'd gone once.
现在我们可以在大选年进行选举 and now we can take that face election year
给定一个斜角 and given a bevel
就像我们在另一部分做的那样 just like we did it for the other part
或其他部分 or other parts
再给它一个层次 gonna give it a second level
使其成为 to make its
位图曲线。 the bitmap curved.
我想要 and I want to take
这些边 these edges here
在循环中 at loop
并且 and
转换成一个面选举，这样我们就有了一个平滑的小组。 converted to a face elections so that we have one smoothing group for her.
这两个部分 these two segments there
现在我要把这些蚊帐都清除掉，我们不需要， and now I'm just gonna get rid of these nets as you as well that we don't need,
我希望我没有忘记之前提到过但是如果你 and I hope I didn't forget to mention it any earlier but if you
双击边缘 double click an edge
它也会自动形成一个循环回路 it will automatically make an edge loop as well
所以我为它买了一个快捷方式 so I have bought a shortcut for it as well as
通常我只是双击了一条边。 often I just doubleclick an edge.
玛丽有用的 mary useful
现在，我们正在使用应用程序接收器。 and now we are getting there with apps receiver.
只剩下一个重要的步骤了 only one important step left
我们必须填满 we have to fill the
内心的 inner
部分接收器有一些下颌树。 part of the receiver with some jaw tree.
我们要做同样的动作 and we got to perform the same action
我们做到了 that we did
在 on
我们的安全开关。 our safety switch.
首先 first of all
那个财政 that fiscal
外壳修饰符。 shell modifier.
考虑到合适的深度年 and given the proper depth year
因为0实际上不是固定的，也不是 point since zero is actually not to fix or zero point zero
5应该没问题 five should be fine
所以 so that
接口 interfaces
崩溃。 collapse.
拿着这些脸 take these faces
把它们分开。 and detach them.
现在 and now
我想在这一年做的不是 what I want to do a year with that is not
立即删除它 immediately delete it
但是我要 but I'm gonna
删除它的大部分部分。 delete most parts of it.
但是我要把这个部分留在袋子里。 however I'm going to leave that part there in the bag.
确保我有 make sure I've got
所有其他的面孔都被选中了 all these other faces selected
现在就把它删掉 now just gonna delete that
现在 and now
我们留给你的是后面的那一小块 we are left you with that little piece in the back
我想把它附加在上面， which I wanna attached to it,
同时焊接在一起。 and also welded together.
现在我们可以把这些 and now we can take these
这里的边 edges here
买了一条护城河 in bought a moat
还有橱柜。 and cabinet.
现在我要讲的是未来 and now I will go over into the from prospective
连接这些垂直轴 and connect these vertical axis
这又给了我们 and again that gives us
把你的交易员和里面的人都叫了出来。 cheeped your trader and the inside it
非常方便 very convenient
很容易创建 and easy to create
然后给我们留下一个滴管 and leaves us with a dropper
上面的接收器部分。 upper receiver part here.
这个有点被推了所以让我在这里找到正确的顶点 and this one's a bit pushed out so let me find the right vertex here
为了建立这种联系， to make that connection,
在所有这些看起来都很好， and over all that looks pretty good,
已经有了更多的 already and so just some more
连接在这里。 connections here.
它不需要像我做的那样百分百 it doesn't have to be like hundred percent what I'm doing right
现在只要你 now as long as you just
确保没有东西在翻动。 make sure nothing is flipping.
我们很适合去那里或者是内部的部分 we are pretty much good to go there or the inner part of the
接收器 receiver
并且 and
其他实验室 other labs
这是很重要的。 that's pretty much get here for it.
我要把这些脸 just gonna take these faces
这是难以置信的 that are incredibly inside
一个接一个。 one by one.
我还想说 and I also want to then
这是一个庞大的群体的标志。 a sign a sprawling group to it.
所以我们把它的外光滑 so let's give it the outer smooth
好了。 and there we go.