So this is the 1851 Development Board, which I was talking to this development board, you can get
in online, OK and get a new development board if you want.
It is not necessary if you want to go and work in the simulation tool itself using the method which
are taught in the previous video, but otherwise you can buy this hardware if possible.
Right.
So this is the 1851 Development Board.
This is the main I see it, given the which started with a zip socket so we can open the socket and
take the AC.
OK, so this is actually the 89 explained to M.I.T. They definitely wanted to veto this.
The board is nothing.
OK?
The board is actually nothing without this only forward, only to work with this IEC.
We are having all these papers, right?
So let me insert my I see like this.
As you can see well in setting up, ensure that this mark is actually in the direction of these if socket,
that means the top.
All.
So you are going to do what I see like this and you have to closely the if Typekit right?
And that's OK.
Close.
And you can see you have Ford portrayed in your idea of doing so goes for both points are given here,
but one for three.
And this is board zero point zero and this is bold too, right?
And also, you have elderly inputs to give inputs to the lady and check whether boats are working or
not.
Only this portion comprises of your 1841, that is the AEC and the boats.
Right?
This is nothing but an input to an external entity, which is in the development book right.
So you can pick output from your code and you can connect it to the police and check whether entities
are working or not.
It is possible, right?
So this is a leading input, which is not for which is not coming along with this IEC.
It is an extension of this development, but please state or understand that in your data, you only
have boats, right?
Really, inputs is an extension, OK to check your eyes.
These are all very barrels, which you can use it to work with this.
80.
That's it.
OK, then here you have some automatic ski.
OK, compressible give, which I will be explaining how to program this right?
And you have someone segment display here.
Again, it isn't a nearly one day.
I'll explain this principle also and tell you how to program this on deck mentality.
For that, you have this on segment input here.
You can actually give your input.
All your inputs must be given only through reports, right?
So you can take input from boards and you can give it to her output from boards and give it to her.
So whatever data you place on the boards will be going through this seven segment display, which will
be displayed here.
And to select the segments, we have four segments right to select the segments we have for benessere
or control lines in QUALITÉS.
OK, that is there and we have a max boot at the door you see here, which is nothing but detail to
our standard converter.
We have an artist to get the pin here, which is virtual communication.
This is beyond the scope of this course, so we will need this OK.
And we are forced with just for general purpose here, actually to see headquarters, which is OK.
So we can use this with just two, according to our applications, right?
And we have a reception also who execute the same program from this doctor.
These have been here.
Basically, the same program can be stopped and we have a part here if you want to can interface.
All right.
And so that's it.
You again, you have another another thing called an alarm.
Someone named 05A will be regulated at three terminal voltage regulator, but activate that heatsink.
But is it the heat sink or heat dissipation?
This prevents our boat from overheating.
Right?
And we have to program this, you know, this mode, right?
This AC, we have to program this.
Do I mean, dump our program from the computer to this easy right so far that we have a law, that we
have a programmer and that programming is nothing.
But if you are dual, program it to the designer that I see, which will be used to program this master.
That is your 8:51, right?
This is my master AC that 851 will be programmed using this aviad dual program rate so that you have
to do that, you have the interface.
So this cable, this is basic cable.
We can connect it to your computer.
OK.
And after that, you can actually interface these pins with the 08:51 Development Board so that it can
be programmed interfacing.
You have to be careful how you can see here.
The ground pin is actually the ground opinions.
Actually, the I don't know if it is clearly visible around the pin is actually the brown color.
OK, as you can see, the ground up in these different colored pin and the reset button is nothing but
the blue color Green Bay, the blue collar pin history reset pin, right?
As you can see, the text things here brings it in ground, so you have to be careful in that.
The reason being that actually the blue color had been great.
So here also you'll be having that reset button here, which is here recipient.
OK, so that is your blue color have been great, so you just have to interface it like this.
OK, so now the bins have been interfaced, so.