Control using B and C protocol V.A. stands for virtual network computing, it mainly allows of viewing
that as better by desktop on any other device with a client or viewer, regardless of the type of the
operating system.
The only thing that you need to do is connecting the rasberry by using Ethernet cable to our outer,
our Internet routing start by starting the L.A. server software and the lustbader by side using these
two commands.
So I would get updates so I would get install dash y type and server.
After Sterling or after the installation had finished uni transiency, well, by writing the following
command, fiancee was one, you need to leave a space double dots and one you will be asked to enter
a password to enter the device, which is different from the rasberry by buzzword.
This password that you will enter, you will use when you try to access the last of from any other device.
It's different than the username and password for for the last period by this password is for remote
control only.
So choose it wisely and remember it now.
After writing the password, one final step remains, which is knowing the IP address for the last bit
of ball using IAFF config command.
When you write I have config, you will get the IP address just like in the as such method.
And now, uh, that bot is ready to be controlled by any other device.
You need to go to the link below and download your operating system.
Client will just click on that link.
You can get all these download links from Madonna dot com software section and my website, you can
download the client for Windows Mac Linux RASBERRY by Solares or H.B.
As you can see, there is a variant almost for every operating system available out there you need to
choose.
I use one of those.
Then I will install the Windows version.
I use ones for about 64 bit.
Just click download.
And fill in the information, submit on the download link will be sent to your e-mail and download back
here once downloaded, you can get.
The download fine.
OK.
OK, I feel the information, this one D'Arby, uh, click, I had read and accept these terms and conditions
and download.
Here is our file and it is our download, it just started.
OK.
Now the Donald has finished.
Click on the downloaded file.
And now it's asking you for the Yancy's here, what you need to be here.
Um, as you can see in the I.B. and Click Connect, it will ask you to provide the buzzword and the
message will appear.
Just click continue and you are good to go.
Um, now let's go back to our.
Buy and install the software.
Let's update our software packages.
As you can see here, it's updating.
It might take some time, depending on the Internet connection speed.
OK, let's see.
Then we will go back to that menu and there is some sort.
That most people you used to automatically run the V.A. say about one bowering on that hospitably unfairest
right, KDDI dash home dash so that you can go to the bar directory, then write code dot config so
that you can enter the config system file.
You need to add a lot before the file name, as you can see.
Now you are in the system file, let's make a directory called Auto Start, I'm KTAR, IRS to start
now, let's enter that directory CD or to start, as you can see here, we are allowed to start directory
that we just created in the config system file.
Now you are here now will create a startup file called Tide Fiancee using the following common nano
deviancy to desktop.
You need to write it like that in order to open software called Nano Edita.
Uh, I wouldn't do it.
I built the program the wouldn't do it appear with a fine name.
Koltai Vanselow desktop.
You just need to enter this data inside that far and then click control X to save that far.
This process will create a text file called Thighed Fiancee Dot desktop with these entries that will
allow starting the V and C Target Yansi server at the beginning of the booting operation for the Raspberry
Pi, which will help you make sure that the Raspberry Pi is always available for Vancity server client
connection.
This is assembly process.
You need to follow it step one step at a time.
If you don't need to use this method, you can skip this section and go to the next one.
But you need to know that, um, and keep it in mind.
This is the and I know Ed window, and this is our call that we just wrote, and as I mentioned earlier,
we need to click Cut-throat plus X control plus X so that you can close and save that file.
That's it for creating a startup fund for V.A. Sarva, this will make your life away much easier.
In the coming lesson, I will show you practically how to connect using B and C and as such.
Thanks for watching.
This is Ashraf Unmodern.