Hello people and welcome to a new episode.
Our pavilion is getting better and better, as you can see.
And in this class we are going to learn another tool.
It is called Follow Me.
It is here.
It is part of the transformation panel.
So as you can see, we have learned already move and copy, push, pull, rotate today.
Follow me scale and the offset to all the transformation menu.
So in order to learn this new tool, we will model the main doors for the entrance to the pavilion.
We have some doors here and we have another doors here.
So first of all, I will start measuring this distance.
It is 248 centimeters, which means that the width of each door has to be 124.
So one auxiliary line in that X in the green, in the green one and I will write 124 centimeters.
Here we are now we have our reference now rectangle, intersection, point and one rectangle here on
this plane.
Click now we have our rectangle with the edges and the surface.
I will erase the surface because for using this follow me tool, we will need a path and this will be
our path.
Now my next movement will be to draw, let's say, the width of that structure in aluminum.
So rectangle again here and five and five enter.
Once I press enter, you can see that I have already my square, but at the same time I have closed
this surface so I have to erase it again.
We are ready for using the follow me.
So first of all, I have to select my path and here we can see that this line has been broken in two
parts.
So I have to select as well this another part.
The reason of this is because of the glue concept.
Now this line, this line as well.
And finally this one, we have our path selected.
Now we click Follow me.
Not before, not after now.
After selecting the path, click.
And now we have to give the tool an area in order to extrude that area along that path.
So one click here and here we are.
We have already drawn our structure in aluminum.
Now Eraser I erase the auxiliary line, spacebar, I select the structure.
I will make a group rectangle again and I will draw the glass first point.
Second point I can use the x ray.
Here we are now letter b in order to select the paint bucket alt and I pick up this glass one click
here we are.
Now again I pick this aluminium one click outside of this group.
Here we are.
Now be careful because we have the aluminium structure inside a group, but the glass is outside.
It is free geometry.
So I will create one box of selection and right button make group.
Now just m for making a copy first point, control second point.
And here we are.
We have drawn our doors, I think in a easier way, cleaner, faster.
And now our next goal will be to make these doors open and close.
In order to do this, we use another tool called Dynamic Components, but this will be during the next
class.