Bring the product to room temperature before use
Turn on the incubator and wait until the temperature is stabilized at 40°C
Open one plastic canister, take the microwells out and place them in the incubator
Dispense 200µL of each sample into the microwells and mix the milk 10 times up and down with the lyophilized gold particles
Press the Start button to iniate the first 5 minutes incubation period
Adjust Test-top device into the incubator and place the appropriate number of strips
After 5 minutes, the strips will be automatically dropped in the microwells and the second 5 minutes incubation period will start
When you hear the sound-signal take the strips out from the incubator and remove the cotton-pad without touching the membrane
Place the strips in EPSON scanner facing downwards
Alternatively, in S-Flow Reader facing upwards
Open the S-Flow software, set Symmetric M1 as Product, select the Milk type and the appropiate Lot number of the kit you have used and click Scan button to obtain the results
Label the Sample ID, the Session title and export the report in PDF,ODS or XLS format