to factory restore your Airport Express
first unplug the power cable once
unplugged you're going to wait for about
10 or 15 seconds or so then using a
paper clip or your iPhone SIM tool press
and hold the reset button while the
power is still disconnected keep holding
the reset button down while plugging the
power back into the airport express then
you'll hold this for 6 seconds
you'll see the airport LED flashing
amber wait a minute or two for the
airport to reboot once rebooted the
light will stay solid amber the airport
is now completely restored to factory
settings as if it were brand new if you
were using the airport to extend Wi-Fi
remember to go into airport utility and
forget the device the softer set the
airport Express you'll just want to
press and hold the reset button for one
second only while the power is still
connected the LED will flash amber and
now you have five minutes to change your
password inside airport utility if you
wanted to do a hard reset the way to do
this is to press and hold the reset
button for five seconds while the power
is still connected you can then go into
airport utility and restore from
previous settings if this video helped
you out please like and subscribe and
until next time this is radial TV