>> Welcome back everyone. 欢迎大家回来
In this section we're gonna show you how to flash the SD card with the images. 在这一节，我们将向你展示如何用镜像刷SD卡
So on Usigi's laptop we already extracted the ZIP file we downloaded in the first Usigi的笔记本电脑上，我们已经解压了第一节下载的ZIP文件
section and we've already installed the Win32 Disk Imager in a second section. 同时我们已经安装好了在第二节下载的Win32DiskImager
>> So, the first thing we're gonna do is Click on the Win32 Disk Imager icon. 现在我们要做的第一件事就是单击Win32DiskImager图标
And it'll ask if you wanna run this app. 它会问你是否想运行这个应用程序
We need to click yes, and a little GUI will pop up. 我们需要点击yes，就会弹出一个小窗口
Next thing we wanna do is, you're gonna see a small button right here. 在这里看到一个小按钮，接下来我们要做的是，
And you're gonna click on that and you're gonna find our image file. 点击它，接着找到我们的镜像文件
Once we go into our image file. 一旦找到镜像文件，
We wanna click on the dot image file, open. 我们就要点击点这个文件，打开
Next we wanna click on the device drive E which is the SD card. 接下来我们要选择设备，驱动器E是SD卡
So when you plug in your SD card into your computer, 所以当你将你的SD卡插入你的电脑
It's gonna have a letter associated with it. 它会有一个字母与它相关联
You can now want to click on that letter. 你现在可以点击那个字母
Finally we're gonna want to write, we're just gonna click right on it. 最后我们想要向SD卡中写东西，我们直接点击它就可以了
And it'll ask is if we're sure we wanna write the image onto the SD card. 它会问我们是否确定我们想要把镜像文件写在SD卡上
And we're gonna write it, and 我们需要写，
it's gonna start flashing that Android Operating System onto the SD card. 它会开始闪烁，Android操作系统开始写在SD卡上
And while this is writing onto the SD card, we'll see you in the next section 下节
on how to actually put the SD card onto the DragonBoard. 我们将告诉你如何把SD卡插到DragonBoard上