Next step let's go ahead and start making geometry. 2
It's going to create this shape right here and do an extrusion on it. 3
It's going to have you here. 4
And let's go grab our tools and we want to do some creepy polygons. 5
So we're going to be fitting them right into this pieces here. 6
So let's go and pull back far enough so that we can sink into it. 7
And there's one click to click and we're just going to work our way all the way through and down to 8
here. 9
We're looking at kind of where does that line fall through. 10
That's what you want to follow through. 11
And when you get to the end of that you hit enter. 12
That's going to create that piece of geometry for us. 13
Let's go take a peek at it in our perspective. 14
There we go. 15
And that's a sign of material to it. 16
And with that piece let's go ahead and do a extrusion on it. 17
And this just all that guy and I love that. 18
There we go girl. 19
You can kind of get an idea of how thick that piece is so it's a little thinner down in there. 20
Back to object mode as we look at that piece. 21
We can see that it is all black. 22
If we want to make that we can double check that may have some of inverted normal's and looks like we 23
do have some inverted normal squeakiest flip on normals. 24
So let's go up to our mesh tools to try to mesh. 25
And let's see where we've got our Flip triangle edge we've got our 26
second match. 27
See if we've got them here 28
display average normal's. 29
There we go. 30
Let's go ahead and we first started on those. 31
And there's our object 32
back and forth from my material and we can push that into our shape right here. 33
And it looks like it's going to be living 34
right in our circle piece right here. 35
There we go. 36
We'll get right into it. 37
OK so that gives us one of the pieces. 38
Let's go back in. 39
Let's take a peek at our next section. 40
It looks kind of like a rectangle where we go and use our tools again to create polygon and create it 41
kind of feel like it bows out just a little bit and add that bow to it 42
and in on the keyboard. 43
So extrusion to it 44
and we look pretty close right there. 45
Let's make sure we're in our object. 46
Otherwise we get a really big piece crease 47
. 48
All right so that gives us our next piece. 49
This one came Kema without normal being Flip's or looking good on that one. 50
OK. 51
That gives us our metal bar going through here and down here. 52
And the last little piece we looked like we might need is right there at the end. 53
So go ahead and create that little piece right there. 54
We'll go back toward tools or poly 55
and take this one down. 56
Or in the middle there and turn on the keyboard to set it let's go and do our extrusion 57
. 58
That looks good. 59
We're going to object mode. 60
Oh this sky over it looks like we're a little bit thicker on that one. 61
Let's go and squeeze that in just a little. 62
There we go. 63
And the one thing that I just noticed on our piece right here we're actually a nice big thick piece 64
that goes all the way through. 65
So I'll go and make a quick adjustment on that guy 66
because apparently we've got 67
a little bit more cover here. 68
That's good for about right in there. 69
And let's just call this one all the way over. 70
There we go. 71
That's being more true to that piece there. 72
OK. 73
That gets those pieces knocked down. 74
Nice and quick. 75
The only other part of that that we could do is make a quick copy of these pieces and move them into 76
place. 77
And let's check out our side you know guide us 78
so we can see on these these are a little bit smaller and then they get a larger piece that goes all 79
the way through them. 80
So I'm going to make see and just going to go ahead and skip this one down a little bit. 81
Let's go right there. 82
This one and I go control d make a copy and go back up a little bit. 83
And this guy is going to be 84
hanging out in the middle 85
in between our arms right in there. 86
Right now let's make sure that everything fits in Nice. 87
The way it's meant to be he's definitely going to be over just a little bit or out just a little bit 88
. 89
So they are just a little bit tight and they're really going to be close. 90
I think we can still make it work just fine. 91
So it's going to just about there when in fact we may want to wait to make adjustments until we get 92
right to the end of it. 93
All right. 94
Some of them take these pieces Control D and let's go ahead and move into 95
autem section here 96
with a sky set up just about right. 97
That's going with him over. 98
Cities in the Midwest. 99
In essence already got him I'm just going to make a copy over to this guy 100
right. 101
That gives us a really good look at where this is going. 102
And I think that sets us up in a nice way for our next piece which we've got the bottom piece right 103
in here we've got a little piece that's like a little block in between. 104
And then we've got the little ball on the end and that's the piece is going to connect back into our 105
spider. 106
But so far we're looking pretty wicked on this one. 107
This is going to be a nice little leg when it's all said and done. 108
All right so we'll end it right there and we'll get started on that piece next.