现在讲解怎么分层加工深度较深的雕像 Now we are going to explain how to work deep sculpture tools in more steps
记住刀具起始点永远是在加工区域的左下角 Starting point is always bottom left from where you want to start on your slab
点击“生成雕像G代码”按钮 So we go again in “generate sculpture G-code”
从模版库中选择一个 We select our model
例如选这个模版 For example, I select this
所有信息都可以在左侧这儿看到 And we have all our information here
假设我们要做的雕像Y轴方向长250mm Now let’s say we want to make the model 250mm in Y
深度为30mm And my model has to be 30mm deep in Z
先计算出目标尺寸与模版原尺寸的比值 So we have to calculate
目标Y轴长250除以原长度484 250mm, we have to divide it by the real dimension in Y, 484
等于0.516 Equal 0.516
将数值输入“X/Y缩放比例” And we have to type it in. here, 0.516
所需深度是30mm，我们还要计算出深度的缩放比 Then when we want to make it 30mm deep, we have to change also the reduction in depth
开始计算 So we calculate
目标深度30除以模版原深度46.3 What I want is 30mm, we divide it by the real dimension, that’s 46.3
缩放比值为0.647 My reduction factor is 0.647
把它输入“深度（Z）缩放比例” And I type in here
现在雕像最深处Z值为-46.3 Now this here is the deepest point of my model, 46.3mm
刀具直径默认为1。步距值我们可以改成0.5mm Tool diameter is always 1 and maybe I want it work 0.5mm each step
最大工作深度填“-10”，使每一次下刀的步距都不超过10mm The farthest work depth that I want, I tell him, -10, so he will not go deeper than 10mm
刀具角度都填“30” The angel of the tool, that’s say always 30
切面厚度，本例子中应填“-10”，因为最大工作深度为-10 Increase depth, in this case, we have to type -10, because the max work depth is -10
切面数，也就是分多少层来切完30mm的厚度，我们设为“3” How many steps you want to work to reach 30mm depth. We have to type 3
加工速度（mm/分钟），输入“1000” Now enter the desired process speed, we type in 1000.
点击“生成G代码” And we generate G-code
不需要带偏角的加工 No (no angular process), enter
我们将会在预览窗口看到生成进度 And you will see on the screen
等一切完成后，模版会重新变回绿色，表示G代码已经成功生成 We have to wait everything comes back to screen, when he finish the process
现在可以看到进度线出现了，模版的颜色发生变化 Now on the screen we can see it is coming. This change of colors
当模版重新变成绿色， When the model become green again,
就说明雕像G代码生成已经完成了 we will have finished our process of generate sculpture G-code for the sculpture
现在它变回绿色了 Now we can see it turn back green
代表已经成功生成G代码 And we finish to generate the G-code
关闭这个窗口 Close this
刀具起始位置一定在雕像区域左下角，距石板上方10mm处 We stay bottom left on my slab, 10mm, the distance between the stone and tool
我们在机器上继续后面的步骤 And we go on machine
或者复制 “IMMAGINE”文件 Or we copy always the file “IMMAGINE”
或者在机器上运行ISO程序，指向这个文件 Or we run ISO program on the machine. Direct this file